SCM Motherboard D35 FAQ and Troubleshooting

GPIO Pinout Reference

SCM Motherboard D35 GPIO Pinout

Note the standard GPIO pinout is accessed on the bottom side of the D35 board.

Note the standard GPIO pinout is accessed on the bottom side of the D35 board.

Known Issues - Rev A1

  • Zymbit IO board: Subject to rebooting during high USB in rush current. See Engineering Note 20230721.
  • Zymbit IO board: The ID EEPROM I2C pins are not connected. To use this feature with the Zymbit IO board, you will need two green wires to pins 27 and 28. Contact Support for more information.